By design, Juju operates a very secure environment for deploying your
applications. Even if you have deployed applications, they won't be publicly
available unless you explicitly make them so. To allow public access to
applications, the appropriate changes must be made to the cloud provider
firewall settings. As the procedure for doing this varies depending on your
cloud, Juju helpfully abstracts this into a single command,
juju expose <applicationname>.
For example, you may have deployed a WordPress application using the relevant charm. Once deployed, the application still cannot be accessed by the public, so you would run:
juju expose wordpress
Juju will then take the steps necessary to adjust firewall rules and any other settings to expose the application via its given address. This process may take anything from a few moments to several minutes. You can check on the current status of your applications by running:
This will return a status report similar to:
Model Controller Cloud/Region Version SLA default gce-test google/us-east1 2.3.1 unsupported App Version Status Scale Charm Store Rev OS Notes mariadb 10.1.30 active 1 mariadb jujucharms 7 ubuntu wordpress active 1 wordpress jujucharms 5 ubuntu exposed Unit Workload Agent Machine Public address Ports Message mariadb/0* active idle 1 184.108.40.206 ready wordpress/0* active idle 0 220.127.116.11 80/tcp Machine State DNS Inst id Series AZ Message 0 started 18.104.22.168 juju-5b2986-0 trusty us-east1-b RUNNING 1 started 22.214.171.124 juju-5b2986-1 trusty us-east1-c RUNNING Relation provider Requirer Interface Type Message mariadb:cluster mariadb:cluster mysql-ha peer wordpress:loadbalancer wordpress:loadbalancer reversenginx peer
As you can see in the above example, the
wordpress app is marked as 'exposed'
in the Notes column, meaning that the application is running and available to
users via its public address of 126.96.36.199.
Note: Exposing the application does not change any DNS or other settings which may be necessary to get your application running as you expect.
To return the firewall settings and make an application non-public again, you
simply need to run the
unexpose command. For example:
juju unexpose wordpress